Position: Home Page > Products > Solenoid valve

Products

Product Search

Contact Us

0086-574-88873555

0086-574-88866298

jx@nbqd.com

Add:Shangshan Industry Zone,XikouTown,Ningbo city,ZhejiangProvince,P.R.China.      
       
Solenoid valve
Solenoid valve
After 30 years of development , the new best line focused on the design, manufacture and sales of various valves 2 /2 solenoid valve has aluminum , copper , stainless steel , and a variety of different materials processing , and medium temperature and ambient temperature can be achieved : -20 ~ 180C. working pressure up to 1.5Mpa. thread sizes from 1 / 8 " to 2 " different styles of products . New g...
  • 2Q Series 2/2 Aircontrol Solenoid Valve(Normal CIose)
  • 2Q Series 2/2 Aircontrol Solenoid Valve(Normal CIose)

    The pneumatic control valve is fully controlled by the gas, not related to electricity. Equipped with a thin cylinder above the valve body for control valve on and off. Body diameter 22mm to 50mm thread size only 2-1/8 "and 2-1/4" are only two.

  • 2WP Series Solenoid Valve, G1/2
  • 2WP Series Solenoid Valve, G1/2"~NPT1"

    2WP series distribution of direct-acting solenoid valve body material is reinforced nylon PA, nitrile rubber (NBR) seal, suitable dielectric liquid, water, gas, media temperature of 0-60 ° C.

  • 2P Series 2/2 Way Solenoid Valve With Engineering Plastic Body
  • 2P Series 2/2 Way Solenoid Valve With Engineering Plastic Body

    2P series direct acting normally closed solenoid valve, flow aperture is 2.5mm, Port size G1 / 8 "G1 / 4". The body is made of engineering plastics, the use of NBR or VITON seals.

  • 2V Series Two-position Two-way Solenoid Valve
  • 2V Series Two-position Two-way Solenoid Valve

    2V series: low power consumption, the pilot valve and main valve centralized exhaust products are small, high operating frequency, large flow, beautiful appearance, quick action, can be integrated installation, good abrasion resistance and long service life. Magnetic pilot valve is usually as a gas control valve and pilot control, can also be directly controlled pneumatic device, tube-fit, the board pick tandem form of three installation.

  • SLG series2/2 Solenoid Valve(Nomal Close)
  • SLG series2/2 Solenoid Valve(Nomal Close)

    As long as the SLG5404 series pilot pressure solenoid valve for high pressure medium control, can withstand a working pressure of 50 kg and a high temperature of 150 degrees Celsius. The valve has two coil form the pinout form and DIN junction box form, size from 1/2 "to 1".

  • VX2120/2130 Series 2/2 Way Direct Acting Solenoid Valves
  • VX2120/2130 Series 2/2 Way Direct Acting Solenoid Valves

    VX series solenoid valve Port size from 1/8 "to 1/2" with a lead wire-coil, zero-pressure pneumatic, can withstand a working pressure of 10 kg, is a direct-acting, two-way solenoid valve.

  • Pu220 Series Solenoid Valves
  • Pu220 Series Solenoid Valves

    The PU series direct acting solenoid valve, Port size from 1/8 "to 1", 3/8 "-1" coupled with a timer the automatic drainage control valve. The timing control of the solenoid valve frequency can be adjusted within 1-45 minutes the drainage time control can be carried out at 1-10 seconds.

  • 2L Series Two-position Two-Way Solenoid Valve
  • 2L Series Two-position Two-Way Solenoid Valve

    The pilot Czochralski piston type solenoid valve, direct acting solenoid valve structure. PTFE seals and high temperature coil. Maintain the normal function of the product to ensure that the products at high temperatures. Top structure, self-sealing compensation lengthens the service life of the valve. Solenoid magnetic field design allows the product to achieve a higher pressure. The balance piston clearance design greatly enhanced the valve reliably at higher temperatures, the use of.

  • JXF series 2/2 Pulse Valve(Nomal Close)
  • JXF series 2/2 Pulse Valve(Nomal Close)

    JXF series pulse valve, pulse bag filter dust removal system, played the role of the air compressor switch. Pulse jet control device output signal control JXF series pulse valve setting range can dust a little bit of clean up.

  • JMF Series Right Angle Pulse Valve
  • JMF Series Right Angle Pulse Valve

    JMF Series right angle pulse valve solenoid control and pneumatic control two types of international leading technology, dedicated to dust, the main parts are made of imported materials.

  • JMFY Series In Line Pulse Valve
  • JMFY Series In Line Pulse Valve

    JMF series of international leading technology research and development from dedicated to dust, the main components is the use of advanced materials from abroad, both normal and explosion-proof wiring.

  • VMI Series Two-position Three Way Solenoid Valve
  • VMI Series Two-position Three Way Solenoid Valve

    VMI series compact two-way solenoid valve is a direct acting structure, compact, all interfaces on the same pipeline, coil line holding isolated position. VMI series of two-way solenoid valve can be widely used for automatic control of the cylinder, valve actuators and equipment.

  • RSC Water Dispenser Series Solenoid Valve, G1/8
  • RSC Water Dispenser Series Solenoid Valve, G1/8"~G1/4"

    RSC Water Dispenser Series Solenoid Valve, G1/8"~G1/4"

  • Pressure Switch
  • Pressure Switch

    Hep pressure switch receives the pressure signal, the operation of the automatic controller, in the refrigeration apparatus, when the compressor exclusion pressure exceeds the setting value or the suction pressure is below the set value, the pressure controller will automatically cut dialup, the compressor is stoppedplay a security role.

  • 2W series solenoid valve
  • 2W series solenoid valve

    2W series solenoid valve straight-action diaphragm structure without pressure starting to expand its field of use plate diaphragm structure with reliable start and close, and enhance the life of the product. Choose plastic sealed coil improves the safe use of the product in many environments. Product uses 2W series solenoid valve, the valve body forging molding, trim is made of stainless steel for the medium of liquid, gas pipeline control on and off automatically.

  • The JFD Series solenoid valve
  • The JFD Series solenoid valve

    JFD series solenoid valve that since launch has been warmly welcomed in the market. Suitable medium: liquid, gas, oil (≤ 20CST); Body Material: Brass (forging), stainless steel (precision manufacturing); the coil protection level: iron bright coil IP54.

  • PS / PS-J solenoid valve
  • PS / PS-J solenoid valve

    The series made ​​of stainless steel and PTFE (polytetrafluoroethylene) the applicable medium is steam, air, water, liquid, oil. Customers can purchase fluorine rubber sealing parts (Viton) over medium hot or at room temperature, up to 150 ° C, the maximum temperature of the medium.

  • JX / JXP series angle seat valve
  • JX / JXP series angle seat valve

    JX / JXP series angle seat valve made ​​from stainless steel or plastic, there are a variety of seals that can be selected to suit the different media, its Port size from 3/8 "to 2".

  • JFD-CF Series Flanged large caliber liquid / gas solenoid valve
  • JFD-CF Series Flanged large caliber liquid / gas solenoid valve

    The JFD-CJ series is a large-caliber solenoid valve. Body material: cast iron (precision manufacturing), stainless steel (precision manufacturing); coil protection factor: iron bright coil IP54, plastic coil IP65.

  • JSP / JSP-J series solenoid valve
  • JSP / JSP-J series solenoid valve

    JSP / JSP-J series solenoid valve body material is brass (forging) stainless steel (precision manufacturing). Working medium: liquid, water, gas, hot water, oil, gas; media temperature: -10 to 80 ° C. Diaphragm seal, diaphragm material: nitrile rubber (NBR). The coil protection level: Plastic Coil IP65.